Login

             No account yet? [for members only]

Pylon Leader Board

Stock T-28

PilotPoints
Brian Germone60
Jon Stychno54
Adam Clement52
Justin Langolis47
Steve Cole44

Full T-28 points table

Foamy Warbird

PilotPoints
Brian Germone50
Steve Cole49
Jon Stychno41
Adam Clement34
Justin Langolis26

Full Warbird points table

12th Scale Nitro

PilotPoints
Adam Clement22
Red Jensen13
Brian Germone10
Steve Cole5
Jason DeLoach0

Full 12th scale points table

Print E-mail
2010 Race Class definitions
For the 2010 season we will race three classes.
  • T-28

    This class provides an entry level as well as a one design type class to promote racing in general with specific limitations on the airframe and modifications to ensure easy participation.

  • Foamy Warbird 450

    This class provides a Warbird/Reno type class to promote scale racing. The aircraft are loosely constrained and airframe modification is encouraged. Reno type color schemes are also encouraged but not required.

  • Reno Warbird 4-stroke 30

    This class provides a warbird/Reno type racing class that utilizes larger and faster airframes. Aircraft are to be 1/12th scale +/- 5% and will allow for twin aircraft and a specified engines. Reno type color schemes are encouraged but not required.


T-28

Airframe

  • only stock ParkZone T-28 or Corsair is eligible
  • must have ParkZone landing gear installed and propeller provided with the kit
  • no modifications of any kind to the airframe (i.e. clipped wings or tail)
  • decals may be removed and personal markings applied
  • planes may be repainted

Power Section

  • Stock ParkZone 480 motor only
  • 3S (11.1v) lipo only of any capacity
  • Propeller may be balanced
  • ESC must retain factory default timing settings

Foamy Warbird

Airframe

  • any brand of foamy Warbird
  • minimum wingspan of 31 inches
  • wings, tail & fuselage may be clipped, sanded etc.

Power Section

  • stock E-flite 450 outrunner only
  • 3S (11.1v) lipo only of any capacity
  • any prop

Reno Warbird 30 4-stroke

Airframe

  • The model must be scale replica of a pursuit, fighter, or attack aircraft produced or in service between 1935 and 1955, or have raced in a Reno Unlimited heat. For the purpose of this contest, an aircraft shall be considered a pursuit, fighter, or attack aircraft if its missions routinely involved, or its designer intended any of the following: a) interception of enemy aircraft; b) high-speed ground or sea attack; c) dog fighting; d) long- and short-range escort.
  • The aircraft must have been originally designed to have had onboard guns installed. Aircraft that had guns mounted for defensive purposes only shall not qualify as pursuit, fighter, or attack aircraft.
  • Aircraft must resemble their full-scale counterparts, and be 1/12th scale +/- 5%.
  • All deviations from scale outline must be within five (5) percent of each other and within five (5) percent of scale, and retain scale shape and proportions. For example, scaling a model’s wingspan up 5% and the fuselage down 5% is not allowed. The deviations shall all be in the same direction (plus or minus); it is not permissible to scale some elements up and others down. Fuselages must be fully built, no profiles allowed. Landing gear not required.

Power Section

  • only Magnum or O.S. .30 4 strokes will be allowed
  • engines must remain unmodified
  • the only exceptions are: glow plug of choice, muffler may be removed, any prop, any fuel